Our thermal pads have good thermal conductivity, high compressibility, self-adhesiveness, insulation, and reduce the thermal resistance caused by air in the gap to achieve good heat transfer effect.

The function of the fan bearing is the dynamic structure that enables the fan blades to run smoothly. The friction loss generated by the bearing operation determines the life of the fan. Therefore, different...

The fan 3-pin connector can be easily connected to a 4-pin socket on the motherboard. The fourth pin is simply left blank in this configuration. In most cases it will run at a fixed speed, uncontrolled. Some...

Stagnant air is pretty bad for heat dissipation. Without air circulation, PC components can quickly accumulate heat, resulting in overheated components and reduced efficiency. The rotational motion of the fan blades...

Static pressure is important for cooling performance where full free airflow cannot be achieved. The higher the static pressure, the higher the strength of the wind flow, and the farther the air can be sent. Without...

Air volume unit conversion: m³/h and CFM When discussing air volume or airflow, we typically encounter two main units of measurement: CFM (Cubic Feet per Minute) - Also written ft³/m, mainly used in the United...

Please confirm that the power supply is normal and check for any obstructions on the fan blades or fan bearings. If the use exceeds the service life, it is recommended to replace the new fan directly.

The lifetime of a DC fan depends on many factors, including bearing type, usage environment, operating conditions, etc. Under ideal conditions, the theoretical lifetime of a fan is usually between 25,000...